Mobile Air Compressor Unit Instructions

Kit Contents

A - Body (two halves)

B - Wheels

C - Trailer towing arm

D - Trailer stabiliser

E - Length of air hose

F - Jack hammers

SKU: MAC03

Build Instructions

1. Take the two body halves (A), apply glue to one surface and press together taking care to align the two parts

2. Now the body and towing arm (C) can be painted to your desired colours

3. Apply glue to the two axle holes on the body and position the wheels (B), making sure the sit nicely within the mud guards

4. Fit the front stabiliser bar (D) by applying a drop of glue to the towing arm and position, the bar is over sized to ease handling and thus should be trimmed to a realistic height when dry

5. The jack hammers (F) may have up to three round tabs that should be removed, then paint as required

6. The wire (E) can be cut into two pieces, to the desired lengths

7. If you strip the end of the wire by 1mm the copper core can be glued in the receiving hole at the back of the body, alternately just offer it up and glue in place