Loco Sized Steel Framed Building and Extension
£9.99
The second in our steel framed building series, this one being slightly lower and noticeably narrower than the first. That is until you add the optional extension kit or multiple kits to achieve the size you are requiring. Designed to allow the average loco to be housed with the opening being large enough to give good clearance.
For a single shed, only the base kit is required and for extension kit use, order the extension kit(s) along with one base kit.
The examples shown of a multi-kit build have a number of parts not fitted to give an 'in construction' vibe. The painted parts picture shows the model sprayed with fine surface grey primer followed by a dusting of silver.
The example of the painted single kit has been covered with a red-oxide fine surface primer.
Scale
Suitable for N scale
Measurements
The complete base kit structure measures 52h x 152d x 42w (mm)
Each extension kit added to the side will add 42mm to the width
Pack quantity
The base kit consists of 6x roof truss A frames, 3x roof connecting beams, 2x sides, 1x end, 1x front, 12x pad stones, 8x side upright fixing plates and 4x corner upright fixing plates
The extension kit consists of 6x roof truss A frames, 3x roof connecting beams, 1x end, 1x front, 4x pad stones, 4x upright fixing plates, 2x centre uprights and 2x front/rear uprights
Construction details
🔧 Printed in grey PLA
🔧 Use superglue to join the pieces together to create the structure pictured
🔧 See here for build instructions and more information
🎨 May be painted with model paints as required
💡 By not glueing in all components you could mimic earlier stages of construction